Introduction of CV-Type Side-entry mixer：
Installing a side-entry mixer in the oil tank, is used for mixing oils or other medium and then reach the purpose of harmonization, heat transfer , homogenization and prevention of sediment accumulation. Using this equipment has many advantages, such as small investment, convenient operation, high efficiency, low power consumption, low static electricity generated in medium and guarantee product quality.
CV-Type Side-entry mixer can be installed in petroleum tank, lubricating tank, fuel oil drum, paraffin tank and some storage tanks for additive and other medium which need to be stirred.
Swing Angle changes of CV-Type Side-entry mixer：
The variable insertion Angle type agitator is used to prevent the accumulation of sediments, and the change of rotation Angle as follows
Material
What are the factors that affect the power of the side entry agitator?
The power of the side entry type agitator will have some impact on its various aspects during use, so you must pay attention to its power problem when using the side-in mixer. So what are the factors that affect the power of the side-in mixer? The following is a specific cause analysis:
The basic calculation method of the stirring power of the side-in type agitator: theoretically, the stirring power can be divided into two aspects: the power of the side-in mixer and the power of the stirring operation.
However, in the theory, only the thinking or the main thinking of the power of the side-in type agitator is difficult to be determined due to the power of the stirring operation. The rotation speed of the set side-in type agitator is generally used to satisfy the stirring operation power required for reaching. From the concept of the power of the side-in mixer, the main factors affecting the stirring power are as follows:
First, the physical properties of the stirring medium, such as the density of each medium, the viscosity of the liquid medium, the size of the solid particles, the aeration rate of the gas medium, and the like.
Second, the configuration and operating parameters of the side-in type agitator, such as the type of side-in type agitator, the diameter and width of the blade, the inclination of the blade, the number of blades, the rotational speed of the side-in type agitator, and the like.
Third, the structural parameters of the agitation tank, such as the inner diameter and height of the agitation tank, the presence or absence of baffles or diversion tubes, the width and number of baffles, and the diameter of the draft tube.
All the factors mentioned above will affect the power of the side-in type agitator. You can adjust it according to the actual situation during the process of use.
Hot Tags: swivel side entry agitator for tank, China, manufacturers, suppliers, factory, buy, customized, quotation, made in China
