The stability of the general agitator is directly related to the environment, voltage, blade, temperature, etc. What are the safety factors for the use of the mixer? The control of temperature and temperature is the direct factor affecting the stability of the mixer. If the temperature is too high or too low, the micro-control system will not be able to obtain reasonable heat dissipation, which will cause the vibration phenomenon during the mixing process, and the stability will be lost. Use at -25 (±5 °C).
For the blade, each blade shaft needs the leaf heart lead hammer, and the blade should use the single flat straight leaf award to prevent uneven force, which will affect the mixing of the artificial disturbance. During the normal operation of the mixer, prevent the manual change of the mixing shaft and temperature probe. Causes looseness and affects stability.
Place the environment, the mixer should ensure that the whole set of equipment is placed smoothly before the normal operation, otherwise it will shake when the mixer is mixed at high speed, causing disturbance.
Voltage, the standard voltage of the general mixer is connected to 220V AC. If it is too large or too small, the piezoelectric will be affected. The voltage should be kept stable. Only the torque acting on the stator is measured to measure the torque acting on the rotor. After deducting the conflicting torque on the rotor bearing, the actual consumption torque of the mixing can be measured. The mixing power can be calculated from the torque and the mixing speed.