Small diameter, high-speed mixer, the power is mainly consumed by turbulent pulsation, which is conducive to micro-mixing. What are the local wear and tear of the mixer? Do you know? In order to make the laboratory mixer work, the gears can be diversified synchronously or asynchronously, and the gears can play a large effect during the active lifting.
And often the test mixer gear is simply worn, most of the reason is that the long-term use of the mixer is not regularly maintained, the lubricant is not given to the gear in time, causing the gear to break during the operation (3JZ8KT$`8X3G6VI[HCO15S.png there is another reason Yes, high-speed full-load operation, the speed of the laboratory mixer is generally controlled at 10~1000 rev / min. If the high-speed overload is used, the gear will be directly damaged and damaged.
The blade laboratory mixer is commonly used in the case of a single flat paddle blade, which is capable of radial force and then drives the mixing of low viscosity liquids as well as the dissolution and suspension of solid particles. The reason why it is simple to wear is because the blade is intuitive to touch. Mixing material parts.
Although it has chemical stability and regular corrosion resistance, if the long-term application will change its precision more or less, and then the blade is damaged, in order not to affect the test power, the laboratory mixer blade is advocated. When there is an abnormal phenomenon, it can be replaced in time.