Most people use the side-in type agitator to operate according to their service life, and they don't have much to know about it. Therefore, the working efficiency is not very satisfactory when using it. In fact, this situation cannot be said to be a problem of a side-in type agitator. Because everyone is not knowing some flaws when using the side-in mixer.
When the side-in mixer is running for one day, the user needs to effectively clean the whole set of equipment, especially the mixing host. What matters should the user pay attention to when cleaning the mainframe? First of all, at the end of each day's work, the side-in blender must remember to thoroughly clean the mixer.
Preferably, during the curing of the concrete, the mixer should be cleaned at least once to prevent the material from being mixed in the drum. Short-term cleaning during production pauses is more effective than cleaning after each shift. What should I pay attention to when I finish?
Secondly, when cleaning the concrete mixer, in addition to a single cleaning with water, it can also be stirred with water and small stones, so that the cleaning is cleaner. In addition, when performing manual cleaning, do not use a hammer to remove the concrete block, in order to prevent the action of the stirring arm from breaking, which is not worth the loss.