The operating temperature of the agitator is very important, and its temperature is a key point that the user must not neglect during the operation. I hope that everyone can pay more attention to the temperature and state of the machine during the operation, so as to avoid some bad accidents caused by the failure. Let's tell you how to adjust the temperature of the stirrer to be correct.
When the agitator is used, the power should be plugged in, the vessel containing the solution should be placed in the middle of the heating plate, and the rotor should be placed in the solution of the vessel.
Turn on the power, the indicator light is on, then adjust the speed control knob clockwise, the speed is from slow to fast, adjust to the required speed, and the rotor rotates to drive the solution to stir. When constant temperature heating is required, insert the temperature measuring probe into the solution, insert the plug into the rear seat of the stirrer, and adjust the temperature knob to the desired temperature.
If the temperature accuracy of the solution is required to be accurate, the temperature of the solution should be measured simultaneously with a thermometer, and then the temperature knob should be adjusted to achieve the required temperature. If you do not need to heat, just adjust the temperature adjustment knob to below room temperature.
Generally, according to the above method, the temperature is adjusted for the agitator without worrying about the problem. The above is a very effective method introduction. I hope everyone can follow the steps.